ASTM A192 Referenced Documents:
ASTM A450 / A450M Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes.
Standard: ASTM A192 / ASME SA 192
Description Name: ASME SA 192 / ASTM A192 boiler pipes; A192 pipes; A192 carbon steel tube; ASTM A192 seamless tubing; ASTM A192 carbon steel pipe; SA192 SEAMLESS PIPE; ASTM A192 cold drawn seamless steel tubes; ASTM A192 pipes and tubing; carbon steel tube; Seamless steel tube; steel tube.
Size: 1⁄2 in. to 12 in. [12.7 to 304.8 mm]
Schedule: 1.5mm-35mm
Length: Single random length/ Double random length or as customer's actual request max length is 27m.
Grade: A192 / SA192
ASTM A192 Seamless tubes Wall Thickness Tolerance
| Seamless, Cold-Finished Tubes | ||
|
||
| Over (+) | Under (-) | |
| 1 ½ (38.1) and under | 20 | 0 |
| Over 1½ (38.1) | 22 | 0 |
ASTM A192 Seamless Tube Outside Diameter Tolerance
| Cold-Finished Seamless Tubes | ||
|
||
| Over (+) | Under (-) | |
| Under 1 (25.4) | 0.004 (0.1) | 0.004 (0.1) |
| 1 to 1 ½ (25.4 to 38.1), Incl | 0.006 (0.15) | 0.006 (0.15) |
| Over 11⁄2 to 2 [38.1 to 50.8], Excl | 0.008 (0.2) | 0.008 (0.2) |
| 2 to 21⁄2 [50.8 to 63.5], Excl | 0.010 (0.25) | 0.010 (0.25) |
| 21⁄2 to 3 [63.5 to 76.2], Excl | 0.012 (0.3) | 0.012 (0.3) |
ASTM A192 Seamless Tubes Flattening Test
ASTM A192 Seamless Tubes Flaring Test
One flaring test shall be made on specie- men from each end of two tubes selected from each lot or fraction thereof. These tubes shall be selected apart from those used for the flattening test.
